Kominki, wkłady kominkowe Hajduk-kominki nowoczesne, kominki klasyczne, obudowy kominkowe, wkłady kominkowe, kominki-sprzedaż, wkłady kominkowe-sprzedaż, obudowy kominkowe, kamine, kamineinsätze, piece

Fireplace inserts with a water jacket

Each Hajduk’s fireplace insert with a water jacket before its despatch is subjected to a pressure tightness testing at the special inspection station.The thermal efficiency in the inserts...

Fireplace inserts

Owing to their modern double-jacket structure Hajduk’s fireplace inserts are reliable and robust heating devices.
In Hajduk’s fireplace inserts the chamotte blocks in the hearth are 5cm thick, thanks to which they can accumulate more heat and better stabilize the temperature during burning lasting many hours.
Thanks to providing Hajduk's fireplace inserts with the automatic flue damper with 3-step adjustment, the force of the chimney draught can be adjusted to obtain the best burning parameters.
The flue tube inside the flue of Hajduk’s fireplace inserts constitutes an additional exchanger recovering heat from the exhaust gases.
The Clear View windowpane self-cleaning system is used as standard in all Hajduk's fireplace inserts. It allows for the prolonged maintenance of cleanliness of the heat-resistant windowpane without the need for the use of cleaning agents. One of the condition that is required for the effective operation of the Clear View system is burning of dry, seasoned wood.
The thermal efficiency of Hajduk's fireplace inserts may reach, depending on the model, even 79%. Due to such good results it is possible to use less fuel and to protect the natural environment for future generations.
In the majority of Hajduk’s fireplace inserts with the doors that open upwardly the Perfect Seal & Easy Roll system is used. Thanks to the applied advanced technological solutions it ensures its quiet and easy use and increased tightness of the hearth.
Hajduk’s fireplace inserts are fitted as standard with the external air inlet and distribution system – Jet Stream. The system ensures a fuller control over the burning process, lesser usage of fuel and meets the requirements of the modern building industry.
Hajduk's fireplace inserts have the specially designed, lower than the door, hearth's bottom, where the surplus amount of ash is accumulated reducing the need for frequent cleaning of the ash pan and providing a stable basis for the burning wood chips.
Hajduk’s fireplace insert should be connected to the chimney of at least the same diameter than that of the stub pipe of the exhaust vent. It is one of the indispensable conditions for the good, stable burning of wood and for ensuring good draught to the chimney. It is particularly important in case of large fireplace inserts with substantial surfaces of the doors.
Hajduk's fireplace inserts with the Jet Stream Extra air supply and distribution system are adapted to draw the majority of air for burning from outside of the building. The air should be supplied from outside of the building through a pipe of at least 150 mm in diameter that should be tightly connected to the connection stub. The Jet Stream Extra system is mounted without additional cost – the only thing the customer needs to do is to provide the name when ordering the specific fireplace insert.